Linear measurement on the job

A pipe wall is half the gap between the outside and inside diameters, and a 6.5 metre by 2.0 metre mat has a perimeter of 17 metres.

Session outline

About 35 min one-to-one, or 40 min with a small group

  1. 1. Warm up (5 to 10 min): Ask the quick questions with notes closed.
  2. 2. Teach: Work through the lesson slides in order.
  3. 3. Coach practice: Use the student examples and try-it tasks.
  4. 4. Check: Finish with the outcome prompts below.

Warm-up questions

  • What is the perimeter of a room?Listen for: The distance around its edges. This checks the basic idea.
  • How could tutors find the thickness of a pipe wall without cutting it?Listen for: Compare the outside and inside diameters. Listen for reasoning.
  • Why would a carpenter measure twice?Listen for: Mistakes waste material and money. This links measurement to work.

What to check they understood

  • M3

    Ask them to find the perimeter of a 6.5 metre by 2.0 metre mat.

    A strong answer adds two lengths and two widths to get 17 metres.

  • A1

    Ask them to find the wall thickness of a pipe with an outside diameter of 5.0 cm and an inside diameter of 4.2 cm.

    A strong answer subtracts to get 0.8 cm, then halves it because the gap includes both walls, giving 0.4 cm.

Likely gaps from earlier grades

  • Students forget to halve the diameter gap. Sketch the cross section.

Work through the class slides

1 / 7

Measuring tools and referents

  • A long stride is about 1 metre.
  • A ruler is about 30 centimetres, which is also about 1 foot.
  • A desk about three rulers tall is about three feet.
  • A pipe fitter reads an outside diameter and an inside diameter before ordering a sleeve that has to match the wall.
A stride, a 30 cm ruler, and a desk three rulers tall 1 stride ≈ 1 m ruler ≈ 30 cm ≈ 1 ft ruler ruler ruler desk ≈ 3 ft