Using the mole ratio leaves less unused reactant and raises the percent of product collected. A scrubber that catches a gas still leaves a residue to handle.
About 35 min one-to-one, or 45 min with a small group
1. Warm up (5 to 10 min): Ask the quick questions with notes closed.
2. Teach: Work through the lesson slides in order.
3. Coach practice: Use the student examples and try-it tasks.
4. Check: Finish with the outcome prompts below.
Warm-up questions
Why would a factory care about using the exact mole ratio of reactants?Listen for: Extra reactant is wasted money and may need disposal. Listen for cost and waste.
Does a car's catalytic converter remove carbon dioxide?Listen for: It reduces carbon monoxide and other gases but still releases carbon dioxide. This checks a common belief.
Their group's result differs from the others. What should tutors do?Listen for: Keep it, check for errors and discuss. Watch for the urge to delete it.
What to check they understood
20-D2.1sts
Ask them to explain how stoichiometry helps an industrial plant reduce waste and cost.
A strong answer says calculating the mole ratio lets the plant add just enough of each reactant, so less excess is bought and disposed of and more product is collected.
20-D2.2s
Ask them to calculate percent error for a titration result of 0.105 mol/L when the accepted value is 0.100 mol/L.
A strong answer subtracts to get 0.005, divides by 0.100 and multiplies by 100 to get 5%, and suggests a source such as reading the burette at the wrong level.
Likely gaps from earlier grades
Students may think scrubbers and converters remove every emission. Each device targets certain gases and leaves others.
Class slides
Work through the class slides
1 / 6
Leftover feed is a cost
A plant that pours a large excess of one reactant pays for material that ends up as leftover reactant.
A higher percent of the calculated product collected means less of that feed was lost to an unfinished change or a side path.